McBoost Mic Signal Booster 25dB for Dynamic and Ribbons

« return to previous page
Radial McBoost Mic Signal Booster 25dB for Dynamic and Ribbons  - Main Image
Radial McBoost Mic Signal Booster 25dB for Dynamic and Ribbons  - Image 1
Radial McBoost Mic Signal Booster 25dB for Dynamic and Ribbons  - Image 2
Radial McBoost Mic Signal Booster 25dB for Dynamic and Ribbons  - Image 3
Radial McBoost Mic Signal Booster 25dB for Dynamic and Ribbons  - Image 4
Price:
RRP: £267.48 inc VAT
Code:
RADMCBOOST
Manufacturer Code:
R800-8016-00
Brand:
Radial

Quantity required:

Main Features

  • Fully variable 25dB booster for dynamic and ribbon mics
  • Extends dynamic range and microphone reach
  • Uses standard 48V phantom for powering
  • 3 position load switch and high-pass filter for greater control
  • Does not require any power supply
  • Makes your dynamic think it is a condenser
Share:

McBoost Mic Signal Booster 25dB for Dynamic and Ribbons

The McBoost is a microphone signal booster designed to elevate the output of a dynamic or ribbon microphone for greater transparency and clarity, and provide enough clean gain to connect to any preamp.

The Radial McBoost provides clean gain at the source for low-output dynamic and ribbon microphones, driving long cable runs with ease and allowing you to connect to any preamp as if it were a high-gain ribbon mic pre. Simply connect the McBoost in-line using standard XLR cables and activate 48V phantom to provide power, then select between three impedance settings to optimize the response from the microphone. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage, or in a broadcast center.

Product Features

  • Fully variable 25dB booster for dynamic and ribbon mics
  • Extends dynamic range and microphone reach
  • Uses standard 48V phantom for powering
  • 3 position load switch and high-pass filter for greater control

Benefits

  • Boosts low output mic signals to a usable level
  • Improves signal-to-noise on long cable runs
  • Improves signal-to-noise with vintage audio gear
  • High pass filter cleans up muddy low end

Cool stuff

  • Will breathe new life into your old SM57
  • Makes your dynamic think it is a condenser
  • Does not require any power supply
  • Works on dynamics and ribbon mics

Product Specifications

  • Audio circuit type:  Class-A Differential DC Coupled FET
  • Frequency response:  <7Hz to >30kHz
  • Dynamic range:  116dB
  • Gain:  +26dB Full Gain, +20dB Half Gain, +4dB to +25dB Variable Gain
  • Clip Level:  +16dBu (output)
  • Total harmonic distortion:  0.006%
  • Intermodulation Distortion:  0.01%
  • Phase Deviation:  <10°
  • Input Impedance:  600Ω / 2.7kΩ / 30kΩ
  • Output Impedance:  220Ω
  • Common Mode Rejection Ratio:  >50dB
  • Equivalent Input Noise:  -125dBu
  • Noise:  -100dBu / -110dBu

Features

  • Input Connectors:  XLR female output
  • Output Connectors:  XLR male output

General

  • Construction:  Cold Rolled Steel
  • Power:  Phantom Power - 48V
  • Conditions:  For use in dry locations only between 5°C and 40°C
  • Warranty:  Radial 3-year, transferable