Vocia VA-2060e 2x60W Digital Amplifier with CobraNet EN54 2U

« return to previous page
Biamp Vocia VA-2060e 2x60W Digital Amplifier with CobraNet EN54 2U - Main Image
Biamp Vocia VA-2060e 2x60W Digital Amplifier with CobraNet EN54 2U - Image 1
Biamp Vocia VA-2060e 2x60W Digital Amplifier with CobraNet EN54 2U - Image 2
Price:
RRP: £5,172.00 inc VAT
Code:
BIAVVA2060E
Manufacturer Code:
913.0321.900
Brand:
Biamp

Quantity required:

Main Features

  • Two channels of 60W RMS per channel
  • Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
  • Supports Page Active Relay (PAR), ELD-1 and ANC-1
  • Local non-volatile storage of emergency messages
  • Ground fault detection
  • Rack mountable (2RU)
Share:

Vocia VA-2060e

The VA-2060e is a digital networked two-channel amplifier for use in Vocia systems. It is capable of delivering continuous audio power at 60 Watts RMS per channel. The VA-2060e is CobraNet® enabled for audio and control with dynamic use of bundles. It has local analogue inputs and dual power supply. Two RJ-45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network. The on-board DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages are stored in local non-volatile memory. Page active relay outputs provide a contact closure per channel when paging is active on the channel. The amplifier offers low impedance and constant voltage outputs. The VA-2060e also has comprehensive failover capability with device-to-device and channel-tochannel failover.

Product Features

  • Two channels of 60W RMS per channel
  • Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
  • Comprehensive failover
    • Device-to-device
    • All-to-1 channel
  • Supports Page Active Relay (PAR), ELD-1 and ANC-1
  • Local non-volatile storage of emergency messages
  • Ground fault detection
  • Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalisation and output sensitivity
  • CobraNet audio/control with dynamic use of available bundles
  • LED status and signal indication
  • Local background source support with single mic/line analogue audio input for each channel (gain-adjustable, switchable phantom power)
  • Dual power supply
    • AC Mains
    • Single or Dual 24V DC inputs
  • Dual Ethernet ports for redundancy
  • Rotary switches for device identification
  • Rack mountable (2RU)
  • EN 54-16 certified, CE marked, and RoHS compliant
  • Covered by Biamp Systems’ 5-year warranty

Product Specifications

General

  • Network Connection: RJ-45 with shielded Ethernet (CAT5, CAT5e, CAT6 or CAT7
  • Memory: 5.625 MB
  • Inputs: 20 bits, 48 kHz, 5-1/3 ms (fixed)
  • Frequency Response (40Hz ~ 20kHz): ± 2dB
  • Signal to Noise Ratio: > 88 dB, unweighted
  • THD+N:
    • 50Hz-100Hz: < 0.5%
    • 100Hz-10kHz: < 0.3%
  • Total Output Power: 2 x 60W RMS, 120W maximum
  • Power: 100-240VAC; 50/60Hz
    • Single or Dual 24V DC source (not supplied)
  • Environment:
    • Ambient Operating Temperature Range: 23-104° F (-5 – 40° C)
    • Humidity: 0 – 95% non-condensing
    • Altitude: 0-10,000 Feet (0-3000 Meters) MSL

Overall Dimensions

  • Height: 3.25 inches (82.5 mm)
  • Width: 19.0 inches (483 mm)
  • Depth: 14.2 inches (361 mm)
  • Weight: 24.7 lbs (11.2 kg)

Compliance

  • EN 54-16 certified
  • FCC Part 15B (USA)
  • CE marked (Europe)
  • RCM (Australia)
  • EAC (Eurasian Customs Union) RoHS
  • Directive (Europe)
  • RINA (Italy)
  • EN 60849, AS 60849 verified