ATW-1301 System 10 PRO Rack Mount 2.4GHz Bodypack Mic System

« return to previous page
Audio Technica ATW-1301 System 10 PRO Rack Mount 2.4GHz Bodypack Mic System - Main Image
Audio Technica ATW-1301 System 10 PRO Rack Mount 2.4GHz Bodypack Mic System - Image 1
Audio Technica ATW-1301 System 10 PRO Rack Mount 2.4GHz Bodypack Mic System - Image 2
Audio Technica ATW-1301 System 10 PRO Rack Mount 2.4GHz Bodypack Mic System - Image 3
Price:
RRP: £469.00 inc VAT
Code:
AUDATW1301
Manufacturer Code:
ATW-1301
Brand:
Audio Technica

Quantity required:

Main Features

  • Does not include microphone, Recommend mic: AT829cW
  • Audio-Technica's System 10 PRO Rack-Mount digital wireless system
  • Provides the interference-free operation in the 2.4 GHz range
  • With expanded features and versatility over the original System 10
  • Easy setup, clear, natural sound quality
  • Three levels of diversity assurance: frequency, time, and space
Share:

ATW1301 System 10 PRO Rack Mount 2.4GHz Bodypack System

The Audio-Technica "System 10 Pro" rack-mountable digital wireless system is so simple to use, so dependable and so automatic that you'll never have to think about it. Set it up anywhere, turn it on and its good to go.

Like the rest of the range System 10, the System 10 Pro works in 24-bit / 48 kHz, and allows easy use while ensuring clear and natural sound quality. The system offers three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimise immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Product Features

  • 2.4 GHz 24-bit / 48kHz Digital wireless system
  • No interference, as operates outside of DTV ;or 3G bands
  • Automatic Frequency Selection. Plug & Play. Ease of use and reliability
  • Offers 3 levels of diversity (frequency, time and space) to ensure communication without interference
  • Rackable metal chassis, comes with a removable receiver (Kit setting rack included)
  • Possibility of 2 interchangeable receivers per chassis
  • Users can pair each receiver with up to 10 transmitters
  • 2 frames or 4 receivers can fit in a 19" 1U rack
  • Possibility to chain up to 5 frames (10 receivers) using RJ12 type cables (one cable per system)
  • Up to 10 systems can be used simultaneously without any frequency coordination problems or group selection
  • Hi-Fi audio quality over the whole frequency range (20 Hz to 20 kHz)
  • No compression during transmission and reception for clear, natural sound

Product Specifications

General

  • Operating Frequencies: 2.4 GHz ISM band
  • Frequency Response: 20 Hz to 20 kHz Depending on microphone type
  • Operating Range: 60 m (200') Open range env. with no interfering signals
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: <0.05% typical
  • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
  • Audio Sampling: 24 bit / 48 kHz
  • Latency: 3.8 ms
  • Receiving System: Diversity (frequency/time/space)
  • Output Connectors (Microphone): Remote Receiver Connector: RJ45 Link Connector: RJ12
  • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external

Physical & Dimensions

  • Height: 209.8mm
  • Width: 44mm
  • Depth: 169.3mm
  • Weight: 940g

Belt Pack

  • RF Power Output: 0 mW
  • Spurious Emissions: Following federal and national regulations
  • Input Connections: Four-pin Locking Connector, 
    • Pin 1: GND, 
    • Pin 2: INST INPUT, 
    • Pin 3: MIC INPUT, 
    • Pin 4: DC BIAS +9V
  • Battery Type: Two 1.5V AA
  • Battery Life: >7 hours (alkaline) Depending on batt. type & use pattern
  • Dimensions: 70.2 mm W x 107.0 mm H x 24.9 mm D
  • Net Weight: 100g

What's in the Box?

  • Included AC adapter
  • Link cable
  • Rack-mount adapters
  • Joining plate
  • Rubber feet
  • ATW-RC13 Rack-mount receiver chassis
  • ATW-RU13 receiver unit
  • ATW-T1001 UniPak® transmitter