Control 50S/T-WH 8" Compact SUB 200W 8Ω/100V White

« return to previous page
JBL Control 50S/T-WH 8 Compact SUB 200W 8Ω/100V White - Main Image
JBL Control 50S/T-WH 8 Compact SUB 200W 8Ω/100V White - Image 1
JBL Control 50S/T-WH 8 Compact SUB 200W 8Ω/100V White - Image 2
Price:
RRP: £708.00 inc VAT
Code:
JBLC50STW
Manufacturer Code:
JBL0879
Brand:
JBL

Quantity required:

Main Features

  • Stylish, unobtrusive design fits into a wide variety of decors
  • High fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Ability to mix and match with Control Contractor40 Series models
  • Wall-mount brackets included
Share:

Control 50S/T-WH 8" Compact Satellite-Subwoofer System - White

The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

Product Features

  • Full bandwidth 32 Hz – 20 kHz high fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Available in black or white

Product Specifications

General

  • Frequency Range (-10 dB): 32 Hz – 200 Hz
  • Frequency Response (±3 dB): 50 Hz – 150 Hz
  • Power Capacity: 
    • 300 Watts Continuous Program Power (2 hrs)
    • 150 Watts Continuous Pink Noise (2 hrs)
    • 200 Watts Continuous Program Power (100 hrs)
    • 100 Watts Continuous Pink Noise (100 hrs)
  • Nominal Sensitivity (2.83V, 1m): 95 dB (near corner), 89 dB (center of wall)
  • Rated Maximum SPL (1m): 
    • 115 dB average, 121 dB peak (near corner)
    • 109 dB average, 115 dB peak (center of wall)
  • Nominal Impedance: 8 ohms (in bypass/thru mode)
  • Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
  • Transducer Driver: 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
  • Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Material: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.

Physical & Dimensions

  • Cabinet Height: 356mm
  • Cabinet Width: 391mm
  • Cabinet Depth: 203mm
  • Wall Bracket: 15mm deep
  • Wall Bracket: 2.3mm thick zinc-plated and painted cold-rolled steel
  • Net Weight9.0 kg

Product Downloads