ERA 600 Performance LED Profile Moving Head 550W

Product Features

• Bright 550 watt / 6,500K LED light source
• 19,000 lumen output
• Crisp optics with flat field
• 1:8 Fast zoom
• CMY colour mixing - Vibrant colour mixing with a superior palette of colours matching the MAC range
• Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette
• 7-slot colour wheel –for added colour choice and split colour effects
• Full Curtain Framing blades with +/- 60° rotation of entire system for flexible shape generation
• 7 rotating/indexing gobos – All renowned Martin glass gobos
• 8 static gobos for great morphing effects
• Animation wheel with continuous bi-directional rotation
• Two prisms - 4-facet and linear – rotation and index control for dynamic effects
• Heavy frost – A light frost leaves gobo artwork visible with a beautiful soft edge.
• Compact and low weight design

Product Specifications

PHYSICAL

• Length: 416 mm (16.4in.)
• Width: 290 mm (11.4in.)
• Height: 734 mm (28.9in.)
• Weight: 30.0 kg (66.1lbs)

DYNAMIC EFFECTS

• Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
• Electronic dimming: 0 - 100%, four dimming curve options
• Colour mixing: CMY, independently variable 0-100%
• Colour temperature control: Variable 6500 - 2700 K
• Colour wheel: 7 colour filters plus open
• Gobo animation: Animation wheel, indexing, continuous rotation with variable speed and direction
• Rotating gobo wheel: gobos plus open, wheel rotation, gobo rotation, indexing and shake
• Static gobo wheel: 8 gobos plus open, wheel indexing, rotation and shake
• Iris: 0-100%
• Zoom: Motorised
• Focus: Motorised
• Framing: Rotatable framing module, +/-60°, with 4 individually controllable full framing blades with variable angle and position.
• Prism: 2 rotating/indexing prisms (4-facet circular prism and 6-facet linear)
• Frost: Heavy Frost - for wash effects
• Pan: 540°, coarse & fine control and speed
• Tilt: 260°, coarse & fine control and speed

CONTROL AND PROGRAMMING

• Control options: DMX
• 16-bit control: Dimming, pan and tilt
• Setting and addressing: Control panel with backlit LCD display
• DMX channels: 41
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: Opto-isolated RS-485

OPTICS

• Front lens diameter: 120 mm
• Zoom range: 6° - 45°
• Light source: 550W LED engine
• Minimum LED lifetime: 20000 hours (to >70% luminous output)*
  • *Manufacturer´s figure obtained under manufacturer´s test conditions

PHOTOMETRIC DATA

• Light engine luminous output: 37000 lumens
• Fixture luminous output: 19000 lumens
• CRI (Colour Rendering Index) : >70
• CCT: 6500 Kelvin
• LED refresh rate : 3600 Hz

CONSTRUCTION

• Housing: High-impact flame-retardant thermoplastic
• Colour: Black
• Protection rating: IP 20

GOBOS

• Gobo diameter: 23.0 mm +0/- 0.2 mm (0.91 in. +/- 0.008 in.)
• Maximum image diameter: 19.0 mm (0.75 in.)
• Gobo thickness, maximum: 1.1mm (0.04 in.)

INSTALLATION

• Mounting points: Two quarter-turn brackets for rigging
• Orientation: Any

CONNECTIONS

• AC power in, thru: Neutrik powerCON TRUE1
• DMX data in/out: 5-pin locking XLR

ELECTRICAL

• AC power: 100-240V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Idle Consumption: 85 W, all effects static, zero light output
• Half-cycle RMS inrush current at 230 V, 50 Hz: 21.7 A

TYPICAL POWER AND CURRENT

• 120 V, 60 Hz: 6.5A, 778W, PF 0.994
• 230 V, 50 Hz: 3.15A, 760W, PF 0.967
  • Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor.

THERMAL

• Cooling: Forced air (temperature regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C
• Minimum ambient temperature (Ta min.): 0° C
• Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
• Total heat dissipation (calculated, +/- 10%): 2660 BTU/hr.

APPROVALS

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class B, ICES-005 Class B
• Australia/NZ: RCM
• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)