Exterior PixLine 20 RGB 1270mm Clr Front Alu

Product Features

• 20 mm pixel pitch
• 125 cd per meter calibrated
• 80 lumen per foot calibrated
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system

Product Specifications

General

• Control and Programming
  • Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
  • Protocol detection: Automatic
  • Control modes: RGB, basic, segment and pixel-level
  • DMX channels: 3/10/13/31/55/199
  • Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Color and intensity calibration: Pixel-level
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Via Martin P3™ System Controller
• Control/User Interface
  • Device status: Multi-color visual indication
  • Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
• Optics
  • Type: Clear Front
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer’s test conditions

• Photometric Data
  • Color resolution: 16 bits per color (48 bit per pixel)
  • Viewing angle: 120° x 120°
  • Pixels per meter: 50
  • Pitch (pixel center-to-center): 20.00 mm
  • Luminous intensity, calibrated mode: 125 cd per meter*
  • Total output, calibrated mode: 375 lumens per meter*
  • Total output, calibrated mode: 4 166 nits (modules spaced 30 mm center-to-center)*

*Preliminary data, figures are approximate

• Video Processing
  • Brightness control
  • Gamma correction and control
  • Color temperature control
  • Color space control
  • Calibration processing
  • Synchronization
• Signal Protocol
  • P3 (via Martin P3™ PowerPort) or DMX
• Construction
  • Base: Extruded aluminum profile
  • Color: Clear anodized
  • Protection rating: IP66
  • Impact resistance: IK05
  • RoHS compliant
• Installation
  • Orientation: Any
  • Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
• Connections
  • Power and data input: 6-pin custom (BBD) IP66-rated
  • Power and data thru: 6-pin custom (BBD) IP66-rated
  • Hot plugging compatible
• Electrical
  • Nominal input voltage: 48V DC +/- 4%
  • Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP or generic 48 VDC PSU
  • Max. total power consumption: 17 W per meter (at max. intensity, full white)
• Thermal
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 55° C (131° F)
  • Minimum ambient temperature (Ta min.): -20° C (-4° F)
  • Total heat dissipation (calculated, +/- 10%): 55 BTU/hr per meter

Physical & Dimensions

• Length: 1270mm
• Width: 27mm
• Height: 32mm
• Weight: 1.6kg