MA60T Mixer Amp 70/100VTransformer 4-Line/1-Mic Input 1/2 Rack

Product Features

• Four-input mixer-amplifier with integral 50w, 70/100v Internal Transformer fitted.
• Gain trims on all inputs
• Electronically-balanced mic input
• 3.5 mm jack input (LINE 2) for MP3 player, laptop, etc.
• Overall HF & LF EQ adjustment
• Short-to-ground access connector or VOX-triggered paging on mic input
• Selectable LINE 4 priority over other music inputs
• Music Mute control input (NO or NC) for interface to emergency system
• Compatible with standard Cloud remotes – RL-1 (music level) and RSL-4 (music level and source selection)
• Electronically-balanced pre-amp output
• Transformer-isolated auxiliary output with independent mic and music level control - for use with telephone MOH systems
• Aux output source selection (internal jumper) – fixed source or follow main output
• Dimensions (mm) - 213.0 wide x 88 high (2U) x 278 deep (+ connectors & knobs)
• Optional Rack Kits (RE-S & RE-L)

Product Specifications

Line inputs

• Frequency Response 
  • Low-Z output: +0/-1 dB, 20 Hz to 20 kHz (65 Hz filter out)
  • 100/70/50 V-line output (with CXL-50T transformer fitted): +0/-3 dB, 20 Hz to 20 kHz (65 Hz filter out)
• Distortion 
  • Low-Z output: <0.05% @ 1 kHz, 1 dB below full power (80 kHz bandwidth)
  • High voltage output: <0.05% @ 1 kHz, 1 dB below full power (80 kHz bandwidth)
• Sensitivity: 195 mV (-12 dBu) to 2.0 V (+8 dBu)
• Input Gain Control: 20 dB range
• Input Impedance: 47 kohms
• Headroom: >20 dB
• Noise: -93 dB, 22 Hz to 22 kHz; measured at speaker output, relative to full power

Microphone inputs

• Frequency Response 
  • Low-Z output: -3 dB @ 100 Hz (3rd. order filter); -1 dB @ 20 kHz
  • High voltage output: -3 dB @ 100 Hz (3rd. order filter); -2 dB @ 20 kHz
• Distortion: <0.05% @ 1 kHz, 1 dB below full power (80 kHz bandwidth)
• Gain: 40 dB range
• Input Impedance: >2 kohms (balanced)
• Phantom Power: 15 V, switchable per-input by jumpers
• Headroom: >20 dB
• Noise: -127 dB EIN, 22 Hz to 22 kHz (150 ohms)

Outputs

• Output Power
  • Low impedance output: 60 W @ 1 kHz & <0.07% THD+N
  • 100/70/50 V-line output: 50 W @ 1 kHz & <0.07% THD+N
• Equalisation: HF: +/-10 dB @ 5 kHz LF: +/-10 dB @ 100 Hz
• Protection: Dynamic level signal limiter max gain reduction of 20 dB, Thermal protection, IV limiting & short circuit protection, Switch on delay

Physical & Dimensions

• Power input: 230 V, 115 V, 100 V versions available
• Fuse Rating: 230/120 V - T2A H
• Fuse Type: 20 mm x 5 mm
• Cooling: Convection cooled, vents top and bottom
• Dimensions (w x h x d): 213 mm x 88 mm (2U) x 278 mm (plus connectors and knobs)
• Shipping Dimensions (w x h x d): 270 mm x 140 mm x 380 mm
• Weight: 4.6 kg 
• Shipping Weight: 5.4 kg 

Accessories

• RL-1W & RL-1B - Remote Volume Level Control Plate in Black or White
• RL-1AW & RL-1AB - USA Remote Volume Level Control
• RL-1DW & RL-1DB - USA Remote Volume Level Control (Decora)
• RL-1x8 - Remote Volume Level Control Plate
• RSL-4W & RSL-4B - Remote Source / Volume Level Select Plate
• RSL-4AW & RSL-4AB - USA Remote Source / Volume Level Select Plate
• XLR-M1W & XLR-M1B - XLR Input Module - White / Black - Male
• XLR-F1W & XLR-F1B - XLR Input Module - White / Black - Female

Need help understanding which Cloud wall panel accessories are compatible with their range of amplifiers or mixers? Download our free guide now.