P3 PowerPort 1500 Indoor Power and Data Unit

Product Features

• P3 image processing technology
• Set-up and addressing via P3 System Controller family
• P3 input and thru to allow daisy-chaining
• 4 hybrid power/data output ports
• Wall, truss and rack-mountable
• Can be located up to 50 m away from the creative LED video products

Product Specifications

PHYSICAL

• Width: 482 mm (19.0 in.)
• Height: 88 mm (3.5 in.) rackmount 2U
• Depth: 335 mm (13.2 in.)
• Weight: 10 kg (22.1 lbs.)

CONTROL AND PROGRAMMING

• Addressing and status: Via P3 System Controller
• Mapping: Via P3 System Controller
• Firmware update: Via P3 System Controller

CONTROL/USER INTERFACE

• Device status: Multicolor status LED
• Power output status: Four LEDs
• Data output status: Four LEDs
• Device test and reset: Pushbutton to call up local test patterns and reset device

P3 SIGNAL PROTOCOL

• Signal type: Gigabit Ethernet
• Protocol : Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

SYSTEM INTEGRATION

• VC-Dot™ family via VC-Feeder™
• Exterior PixLine™ family
• VDO Sceptron™ family
• VC-Grid™ family
• VC-Strip™ family
• Exterior Dot-HP™ family

CONSTRUCTION

• Housing: Steel and aluminum
• Color: Matte black
• Protection rating: IP20

INSTALLATION

• Mounting: 19-inch rackmount, wall mount, flown from rigging clamps

CONNECTIONS

• Power input: Neutrik PowerCon
• P3 data in/out: Two Neutrik Ethercon RJ-45 sockets
• Combined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)

ELECTRICAL

• AC power: 100-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)
• Main fuse: 10 AT (slow blow) x 4

THERMAL

• Cooling: Filtered forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 45° C
• Minimum ambient temperature (Ta min.): -20° C
• Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. (not including display devices but with system at full load) Approvals

APPROVALS

• EU safety: EN 60950
• EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 60950-1
• Canadian safety: CSA C22.2 No. 60950-1

INCLUDED ITEMS

• Mounting brackets incl. screws
• Safety cable attachment eyelet

Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories)

ACCESSORIES

• Air Filters 60x60, Set of 10: P/N 50404543
• Power Connector:
  • Power Connector PowerCON Female : P/N 91611794
• Power Cables:
  • Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
  • Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
  • Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
  • Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
  • (H07RN-F are European approved cables, SJOOW are US approved cables)
• Rigging hardware:
  • G-clamp: P/N 91602003
  • Half-coupler clamp: P/N 91602005
  • Quick trigger clamp: P/N 91602007
  • Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  • Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

RELATED ITEMS

• Martin P3-050™ System Controller: P/N 90721090
• Martin P3-100™ System Controller: P/N 90721010
• Martin P3-150™ System Controller: P/N 90721015
• Martin P3-200™ System Controller: P/N 90721020
• Martin P3-300™ System Controller: P/N 90721060
• Martin P3-PC™ System Controller: Free download from martin.com

ORDERING INFORMATION

• Martin P3 PowerPort 1500™: P/N 90721040

What's in the Box?

• P3 PowerPort 1500
• Mounting brackets incl. screws
• Safety cable attachment eyelet

POWER CABLE IS NOT INCLUDED AND IS SOLD SEPARATELY