RE3-BPCL-8M CH70+Duplex Gap Cardioid Mic Lavalier Bodypack System

Product Features

CL3 Cardioid Lavalier Microphone

• Ideal for general sound reinforcement and presentations
• Cardioid polar pattern rejects ambient sounds and increases gain before feedback
• Delivers full and accurate sound
• Wide dynamic range and frequency response
• Clothing clip holds microphone securely and attaches easily to garments

RE3-BPT Bodypack Transmitter

• Robust metal body
• Sync function for easy frequency setup
• Selectable low and high output power (band specific)
• Up to 36 MHz tuning bandwidth (band specific)
• Unique magnetic latch and lock for easy access to batteries

RE3-RX Diversity Receiver

• Diversity reception minimizes dropouts
• Frequency scanning for selecting open frequencies
• Sync function links transmitter to receiver for easy setup
• Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation
• Easy-to-read LCD display

Product Specifications

CL3 Cardioid Lavalier Microphone

• Element type:  Self-biased condenser
• Frequency response:  100 Hz - 15 kHz
• Polar pattern:  Cardioid
• Sensitivity: open circuit voltage. 1 kHz:  20 mV/Pascal (-34 dBV/PA)
• Maximum SPL:  115 dB SPL
• Impedance:  3700 ohms
• Power requirements:  3-9 VDC
• Polarity:  Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
• Electrical contact pinouts:
  • Pin #1 - Ground, shield
  • Pin #2 - Audio
  • Pin #3 - Bias voltage
  • Pin #4 - N/C
• Dimensions (cable length) :  56.3" (1430 mm)
• Dimensions (head length) :  1.04" (26.4 mm)
• Dimensions (head diameter) :  0.4" (10.1 mm)
• Net weight:  0.758 oz (21.5 g)
• Shipping weight:  6.35 oz (180 g)
• Microphone connector:  4-pin mini plug
• Head finish:  Non-reflecting black
• Material:  Die cast aluminium, steel wire cloth grille, black flexible PVC cable

RE3-BPT Bodypack Transmitter

• Frequency oscillation mode:  Phase-locked loop (PLL)
• Available band names, tuning bandwidths, and carrier frequency ranges:
  • 5L:  36 MHz (488-524 MHz)
  • 5H:  36 MHz (560-596 MHz)
  • 6M:  10 MHz (653-663 MHz)
  • 8M:  (823-865 MHz)*
  • T:  3 MHz (803-806 MHz)
  • *8M is split into two segments:
  • 823-832MHz:  9MHz
  • 863-865MHz:  2MHz
• Sync frequency:  Ultrasonic
• RF power output: Frequency band specific:
  • 5L (488-524MHz): Low 10mW / High 50mW
  • 5H (560-596MHz): Low 10mW / High 50mW
  • 6M (653-663MHz): Low 10mW / High 20mW
  • 8M (823-865MHz) 10mW
  • T (803-806MHz):  Low 10mW / High 50mW
• Display by:  LCD + LED
• Function controls:  Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock.
• RF stability:  <±10kHz@Fc
• Modulation frequency shift:  Wideband FM ±48kHz deviation
• Harmonic radiation:  <-50dBc
• Input jack:  4-pin mini jack
• Battery:  2 x AA alkaline battery or NiMH rechargeable battery
• Charging contacts:  Yes
• Finish:  Black polyurethane paint
• Dimensions (without antenna):
  • Height:  3.2 in. (81.5mm)
  • Width:  2.54 in. (64.5mm)
  • Depth:  0.98 in. (25mm)
• Net weight:  6.14 oz. (0.174 kg)
• Gross weight:  8.29 oz. (0.235 kg)

RE3-RX Diversity Receiver

• Frequency oscillation mode:  Phase-locked loop (PLL)
• Carrier frequency range:  470 - 865 MHz (tuning bandwidth is band dependent)
• Band names, tuning bandwidths, and carrier frequency ranges: 
  • 5L:  36 MHz (488-524 MHz) 
  • 5H:  36 MHz (560-596 MHz) 
  • 6M:  10 MHz (653-663 MHz)
  • 8M:  (823-865 MHz)* 
  • T:  3 MHz (803-806 MHz)
  • * 8M is split into two segments: 
  • 823-832MHz:  9MHz 
  • 863-865MHz:  2MHz
• Sync frequency:  Ultrasonic 40 kHz
• Diversity:  Antenna diversity
• Bandwidth:  36MHz
• Signal/Noise ratio:  >100dB(A)
• Total harmonic distortion (Thd):  <0.6%@1kHz
• Receiving sensitivity:  -81dBm for -12dB SINAD
• Frequency response:
  • 63Hz~16kHz±2dB (BPT)
  • 51Hz~16kHz±2dB (HHT)
• Antenna type:  Detachable ½ wave with BNC connector
• Antenna booster power:  DC12 - 15V/100mA
• Function display by:  LCD
• Contents of display:  Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator.
• Control functions:  Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
• Sync data options:  Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
• Audio frequency output level:
  • Ref：±22.5kHz Dev@1kHz Tone ¼” (6.3mm) 
  • Phone Jack：-10dBV XLR
  • Jack：-4dBV(Line)、-24dBV(MIC)
• Audio frequency output impedance:
  • 240Ω (unbalanced)
  • 1400Ω (balanced)
• Squelch and noise muting:  Noise muting and tone code locking
• Output ports:
  • 1 x balanced XLRM jack
  • 1 x unbalanced ¼” TS (6.3mm) jack
• Power supply:  DC12~15V/500mA
• Finish:  Black polyurethane paint
• Dimensions:
  • Width: 8.27 in. (210mm)
  • Height:  (with feet attached) 1.85 in. (47mm)
  • Height:  (without feet attached) 1.73 in. (44mm)
  • Depth:  (including antenna jack) 6.89 in. (175mm)
  • Depth:  (not including antenna jack) 6.1 in. (155mm)
• Net weight:  2.71 lb (1.23 kg)
• Gross weight:  3.28 lb (1.49 kg) 

What's in the Box?

• 1 x Receiver
• 2 x Receiver antennas
• 1 x Receiver power supply with four power convention-specific AC plug clips
• 2 x Rack-mount brackets
• 2 x Rack-mount bracket hole filler plugs
• 1 x Pack of four screws to mount rack brackets
• 1 x Safety booklet
• 1 x Installation manual