StageBug SB5W Passive Stereo Wall Mounted Direct Box

« return to previous page
Radial StageBug SB5W Passive Stereo Wall Mounted Direct Box  - Main Image
Radial StageBug SB5W Passive Stereo Wall Mounted Direct Box  - Image 1
Radial StageBug SB5W Passive Stereo Wall Mounted Direct Box  - Image 2
Radial StageBug SB5W Passive Stereo Wall Mounted Direct Box  - Image 3
Radial StageBug SB5W Passive Stereo Wall Mounted Direct Box  - Image 4
Price:
RRP: £186.07 inc VAT
Code:
RADSB5W
Manufacturer Code:
R800-0155-00
Brand:
Radial

Quantity required:

Main Features

  • Radial StageBug SB5W
  • 5mm and RCA inputs with level control
  • Passive design, no power needed
  • Contractor-friendly screw terminal outputs
  • Transformer isolation to eliminate noise
  • Fast and efficient installation
Share:

StageBug SB5W Passive Stereo Wall Mounted Direct Box

The StageBug SB5W provides a permanently mounted interface to connect consumer audio devices with installed pro audio systems. Front panel 3.5mm TRS and RCA connectors are provided for any stereo source and a fully variable level control makes volume adjustments easy. Inside, the SB5W employs dual transformers that convert the inputs to a low impedance balanced signal, and eliminate hum and buzz caused by ground loops. Set & forget ground lift and mono switches are also included to further reduce noise and to sum the left and right channels together if needed. The outputs of the SB5W feature screw terminals with tie down points for tie-wraps to make installation fast, efficient and permanent.

Product Features

  • Radial StageBug SB5W
  • 5mm and RCA inputs with level control
  • Passive design, no power needed
  • Contractor-friendly screw terminal outputs
  • Transformer isolation to eliminate noise
  • Fast and efficient installation 

Product Specifications

General

  • Audio circuit type: Passive transformer isolated
  • Frequency response: 20Hz - 20kHz
  • Dynamic range: >120dB
  • Gain: -3dB
  • Clip Level:+17dBu
  • Total harmonic distortion: 0.002%
  • Phase Deviation: 0° @ 100Hz; -3° @ 50Hz
  • Input Impedance: Approx 10K with 100K Load
  • Output Impedance: 5k Ohms
  • Equivalent Input Noise: -98dBu
  • Noise: -101dBu
  • Maximum Input: +20dBu
  • Input Connectors: RCA, 3.5mm TRS inputs
  • Output Connectors: Screw down terminals (- G +)
  • Construction: 14 gauge steel chassis & outer shell
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C

Physical & Dimensions

  • Length: 61.4mm
  • Width: 41.1mm
  • Depth: 107.7mm
  • Weight: 227g

Product Downloads