VMA120 Mixer Amplifier 4-Line/2 Mic In 120W 4Ω or 100V-Line 2U

« return to previous page
Cloud Contractor VMA120 Mixer Amplifier 4-Line/2 Mic In 120W 4Ω or 100V-Line 2U - Main Image
Cloud Contractor VMA120 Mixer Amplifier 4-Line/2 Mic In 120W 4Ω or 100V-Line 2U - Image 1
Cloud Contractor VMA120 Mixer Amplifier 4-Line/2 Mic In 120W 4Ω or 100V-Line 2U - Image 2
Price:
RRP: £408.00 inc VAT
Code:
CLOVMA120
Manufacturer Code:
VMA120EK
Brand:
Cloud Contractor

Quantity required:

Main Features

  • Power output: 120 W/channel 
  • Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
  • Four stereo unbalanced line inputs (3 x RCA jack pairs, 1 x 3.5 mm TRS jack on front panel)
  • Rear panel line inputs have individual gain controls
  • Two balanced mic inputs (1 x multipin connector, 1 x ¼” TRS jack), with individual preset gain controls
  • Front panel controls for mic and music levels, line input selection, mic EQ, master level and EQ
Share:

VMA120 - Mixer Amplifier

The Cloud VMA120 is a cost-effective mixer-amplifiers for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible, but offers a useful range of features and configuration options. The units are mono power amplifiers combined with a simple mixer stage. The output may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V-line loudspeaker distribution systems.

Product Features

  • Power output: 120 W/channel 
  • Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
  • Four stereo unbalanced line inputs (3 x RCA jack pairs, 1 x 3.5 mm TRS jack on front panel)
  • Rear panel line inputs have individual gain controls
  • Two balanced mic inputs (1 x multipin connector, 1 x ¼” TRS jack), with individual preset gain controls
  • Front panel controls for mic and music levels, line input selection, mic EQ, master level and EQ
  • Mic input mute switches on front panel
  • Line 1 priority, enabled by front panel switch
  • Mic-over-music priority, enabled by front panel switch
  • 15 V phantom power available at either mic input 
  • 100 Hz high-pass filter on each mic input 
  • 70 Hz high-pass filter in output stage, for use with 5/70/100 V-line systems
  • Fixed limiter – prevents clipping
  • Front panel LED bargraph – indicates output signal level
  • Over-temperature and output DC protection
  • 230 V or 115 V operation
  • Forced-air cooling

Product Specifications

Line Inputs

  • Frequency Response:  20 Hz to 20 kHz, ±1 dB
  • Gain range:  0 dBu to +20 dBu
  • Input impedance:  47 kohms
  • Noise:  <-82 dB (22 kHz bandwidth)
  • Equalisation:  LF: ±10 dB @ 50 Hz HF: ±10 dB @ 10 kHz

Microphone Inputs

  • Frequency Response:  -3 dB @100 Hz (fixed filter) to 20 kHz, ±1 dB
  • Gain range:  2.45 mV (-50dBu) to 245 mV (-10 dBu)
  • Input Impedance:  3.3 kohms (balanced)
  • Phantom Power:  15 V, switchable per-input by jumpers
  • Noise (EIN):  -125 dBu (20 Hz to 22 kHz bandwidth, max gain, Rs = 150 ohms)
  • Equalisation:  LF: ±10 dB @ 100 Hz; HF: ±10 dB @ 5 kHz

For full detailed specifications, please find the datasheet located in the downloads tab.

Product Downloads