Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U

« return to previous page

Biamp Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U - Main Image

Biamp Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U - Image 1

Biamp Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U - Image 2

Biamp Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U - Image 3

Biamp Voltera D 1200.4M Power Amplifier with DSP + Dante 4x300W 1U - Image 4

Price:: RRP: £4,401.60 inc VAT
Code:: BIAVOLTD12004M
Manufacturer Code:: 913.1982.900
Brand:: Biamp

Main Features

4 Channels
1200W Total Power
Compatible with AVB, Dante, and AES67 network protocols
Accurate raised cosine EQ below 160 Hz
Group-controlled raised cosine EQ making it attractive for large systems
Power share up to +100% per channel

VOLTERA D M SERIES - Previously unavailable in this segment, Voltera D M networked, amplified loudspeaker controllers feature the full performance of a standalone Tesira Digital Signal Processor (DSP), built into the 1 RU chassis, providing the capacity to host, select, configure, and tune a complete Tesira-based system.

Configurable through Tesira or VenueTune software, Voltera D M amplified loudspeaker controllers seamlessly combine amplification and processing into a single, cost-effective networked solution ideal for small-to-medium sized venues such as hotels, restaurants, retailers, and houses of worship.

Product Features

4 Channels
1200W Total Power
Compatible with AVB, Dante, and AES67 network protocols
Accurate raised cosine EQ below 160 Hz
Group-controlled raised cosine EQ making it attractive for large systems
Power share up to +100% per channel
Lo-Z or Hi-Z per channel to support hybrid systems
High peak voltage output capability
5-year warranty
Compliant with the US Trade Agreement Act (TAA)

Product Specifications

General
- Number of amplifier channels: 4
- Total output all channels driven: 1200 W
- Maximum output voltage: 145 Vpk
- Maximum output current: 29 Apk
Power per channel all channels driven
- Hi-Z (70 / 100 V): 300 W
- 16 ohm: 300 W
- 8 ohm: 300 W
- 4 ohm: 300 W
- 2.7 ohm: 300 W
Max power per channel using power sharing
- Hi-Z (70 / 100 V): 900 W
- 16 ohm: 650 W
- 8 ohm: 900 W
- 4 ohm: 900 W
- 2.7 ohm: 710 W
- Available on any channel
Network
Ports: 2 1000Base-T ports
Networked media formats supported: Dante, AES67 and AVB
Network modes supported: Converged (all on port 2) or split (control port 1, media port 2)
PoE+ support: If port 1 is connected to a PoE+ switch with a UPS, then the Voltera D will not reboot when mains power is lost
Network latency AVB: 2 ms, Dante : 1 / 2 ms
Sample rates supported: 96 and 48 kHz
Remote interface: Tesira, VenueTune
Third party interface: TTP
Processing
Latency (analog input to output): 2.65 ms (includes look-ahead delay in zero overshoot peak limiters)
Default gain (analog input to output): 29 dB
Per input: Supports input redundancy and failover to analog sources Multilayered group control of raised cosine EQ, gain, delay (≤2 s), polarity and mute
Per output: Very comprehensive processing supporting loudspeaker profiles including
2048 tap FIR, 24 biquads
Dynamic EQ
Peak, program and thermal limiters with side chains
Startup time with PoE+: <1 s
Audio performance
THD+N (1000 Hz, at 1 dB below max output): <0.05%
THD+N (20 - 20000 Hz for 1 W): <0.05%
Frequency response: +/-0.5 dB (20 - 20000 Hz, 8 ohm, unweighted)
Channel separation (crosstalk at 1 kHz): >70 dB
Dynamic range: 117 dB
Back panel interface
Control and monitoring: IO Mute all channels (input), Health (output), Sleep mode status (output), Sleep mode (input)
Programmable GPIO: 4 logic/voltage control pins, defined using Tesira software
Analog input connectors: 3-pin terminal block connectors with 0.15" (3.81 mm) pitch
Output connectors: 2-pin terminal block connectors rated for 41 Arms. Can take up to 8 mm2 (8.2 AWG) cables
Detachable mains connector: 3-pin IEC C14 inlet for C13 cables
Front panel interface: Tamper proof design
NFC status reading: Extensive status and network information can be read with a phone via NFC
Locate: Bi-directional locate functionality
System status indicator: Shows if there are faults within the greater system
Device status indicators: Status, activity and faults
Channel status indicators: Mute, signal, limit and temp
Power and environmental
Cooling: Variable speed fans, front to back airflow
Operating temperature: 32-104F (0-40C)
Relative humidity: 0-95% non-condensing altitude 0 - 2000 m (0-6562 ft)
Nominal Voltage: 100-240 VAC, 50/60 Hz
Mechanical
HxWxD (rack rail to rear panel): 1.7 x 17.5 x 16.9 inches (44 x 444 x 430 mm)
Weight: 17 lbs (7.7 kg)
Included accessories: Rear support kit for 19" 1 RU mount

What's in the Box?

Voltera D M Series device
Euroblock connector plugs for the amplified outputs (yellow)
- 2 plugs for 2 channel amps
- 4 plugs for 4 channel amps
Detachable IEC power cord
2x M6x15mm mounting screws • Rear Rack support brackets
Logic IO mating plugs
Audio input mating plugs
- 2 plugs for 2 channel amps
- 4 plugs for 4 channel amps
Cable ties
Product Documents