VP88 Condenser Stereo Microphone with Selectable Switch

« return to previous page
Shure VP88 Condenser Stereo Microphone with Selectable Switch - Main Image
Price:
RRP: £1,272.00 inc VAT
Code:
SHUVP88
Manufacturer Code:
VP88
Brand:
Shure

Quantity required:

Main Features

  • Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
  • Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs provided
  • 40 to 20,000 Hz frequency response
  • Low noise and distortion, wide dynamic range
  • Switch-selectable, low-frequency roll-off for reduced pickup of ambient noise and stand vibration
  • Phantom power or 6V camera battery with LED power indicator
Share:

VP88 Condenser Stereo Microphone with Selectable Switch

The Shure Model VP88 is a stereo microphone equally effective in studio broadcasting applications as in the field for electronic news gathering (ENGL).

This stereo microphone combines two condenser cartridges in a single housing, in a mid-side (M-S) microphone cartridge configuration. One cartridge (Mid) faces forward to capture on-axis sound in a cardioid pattern. The other cartridge (Side) is bi-directional, capturing sound from either side.

Containing three settings for different degrees of stereo image separation, the VP88 contains an internal M-S matrix that can be bypassed if an external matrix is used, or if stereo imaging is done in post-production. External switches control output mode, stereo imaging, low-frequency roll off settings, and battery on/off.

When the VP88 is set for stereo mode operation (H, M, or L), the left and right signals should remain fully separated and kept at equal levels to maintain a balanced stereo effect.

Product Features

  • Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
  • Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs provided
  • 40 to 20,000 Hz frequency response
  • Low noise and distortion, wide dynamic range
  • Switch-selectable, low-frequency roll-off (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
  • Phantom power or 6V camera battery with LED power indicator
  • Internal shock mount for reduced stand vibration and handling noise
  • Impact resistant, durable construction
  • Integrated heavy-duty "pop" screen
  • Windscreen, swivel mount adapter, and Y-cable included

Product Specifications

  • Type:  Single-point stereo (MS configuration) condenser
  • Polar Pattern:
    • Mid Cartridge Cardioid
    • Side Cartridge Bidirectional
  • Frequency Response:  40 to 20,000 Hz
  • Output Impedance:  EIA rated at 150 Ω (100 Ωactual)
  • Sensitivity open circuit voltage, @ 1 kHz, MS Mode:  -66 dB (0.5 mV)
  • Maximum SPL:
    • 800 Ω load 129 dB
    • 150 Ω load 119 dB
  • Signal-to-Noise Ratio:  70 dB
  • Dynamic Range:  105 dB Maximum SPL, A-weighted
  • Clipping Level @ 1 kHz, 1% THD:
  • 800 Ω load
    • Mid Cartridge -12 dBV (0.25 V)
    • Side Cartridge -10 dBV (0.30 V)
  • 150 Ω load
    • Mid Cartridge -25 dBV (0.06 V)
    • Side Cartridge -19 dBV (0.11 V)
  • Self Noise equivalent SPL:  24 dBA-weighted, 28 dB typical
  • Hum Pickup:  -4  dB equivalent SPL in a 1millioersted field (60 XXXXXXXXXXXX )
  • Operating Temperature Range:  -18°C (0°F) to 57°C (135°F)
  • Storage Temperature Range:  -29°C (-20°F) to 74°C (165°F)
  • Operating Relative Humidity:  0 to 90%
  • Polarity:  Positive pressure applied from any direction to the Mid cartridge or from the left to the Side cartridge in the MS mode, or applied from the front in the Stereo mode produces positive voltage on pin 2 relative to pin 3 (Mid/Left) and pin 4 relative to pin 5 (Side/Right).
  • Housing:  Brass and nickel-plated aluminium construction with stainless steel grille. Finished in satin black vinyl enamel
  • Power Requirements:  9–52 V DC phantom power (IEC-61938) , 1.3 mAoutput, 2.6 mAtotal
  • Battery
    • Type:  6 Vcylindrical
    • Life:  70 hours
    • Current Drain:  2.4 mA total
  • Overvoltage Protection:  Maximum External Voltage applied to Pins 2 through 5 with respect to Pin 1: ± 75 Vdc
  • Net Weight:  417 g ( 14.7 oz.)

What's in the Box?

  • 1 x 80A463 Battery
  • 1 x 26A14 Carrying bag
  • 1 x 49A91 Foam Windscreen
  • 1 x 90B4046 Swivel Adapter
  • 1 x 90A4148 0.76 m Y-Splitter Cable

Product Downloads