Workhorse Tank Driver 500 Series Reverb I/O Module

Radial Workhorse Tank Driver 500 Series Reverb I/O Module - Main Image

Radial Workhorse Tank Driver 500 Series Reverb I/O Module - Image 1

Radial Workhorse Tank Driver 500 Series Reverb I/O Module - Image 2

Price:: RRP: £256.42 inc VAT
Code:: RAD500TOMMY
Manufacturer Code:: R700-0136-00
Brand:: Radial

Main Features

Custom drive circuit for spring reverbs
Separate low and high tone controls
Wet-dry mix to control amount of reverb
Low noise drive circuit for studio recording
Creates lush ultra-analogue effects
Works in all ‘Lunchbox’ style racks

The TankDriver is a device that lets you use the spring reverb that is sitting at the bottom of your guitar amp like a full-blown studio effect! Optimized for use with these finicky circuits, the TankDriver brings the exciting tone and character of a spring reverb to your mix station to create lush, long effects that are simply unattainable using digital technology. Features include a drive control for low sensitivity reverb tanks, high and low EQ controls, and a wet-dry blend control that lets you quickly set the balance between the original track and the reverb effect. Front panel ¼” connectors make it easy to connect to guitar amplifier reverb tanks and bring the signal back to your recording system.

Product Features

Custom drive circuit for spring reverbs
Separate low and high tone controls
Wet-dry mix to control amount of reverb
Low noise drive circuit for studio recording

Applications

Lets you use your guitar amp’s reverb tank
Adds the excitement of old school springs
Creates lush ultra-analogue effects
Works in all ‘Lunchbox’ style racks

Cool Factors

There is nothing cooler than spring reverb!
Front panel i/o jacks for easy connectivity
Shimmer & boom controls... that’s cool!
Army fatigue paint job... sneaky!

Product Specifications

Circuit Type: Class-A, transformer coupled
Current Draw: 60mA, +/-16VDC (maximum draw)
Frequency Response: 20Hz ~ 20KHz +/-1.0dB
Input Impedance: 600 Ohms
Maximum Input: +11dB
Send Gain To Tank: Normal Drive: +10dB @ 4kHz
Boosted Drive: +20dB @ 4kHz
Output Impedance: 75 Ohms @ 1kHz
Maximum Output: +22dBu
Dynamic Range: 101dB to 115dB - (varies with frequency)
Noise: -90dB below 0dBu
Total Harmonic Distortion (THD+N): < 0.012% @ 1kHz and 600 Ohm Load
XLR Configuration: Follows AES spec: pin-1 ground, pin-2 (+), pin-3 (-)
Size: Standard 500 Series format
Weight: 1.5 lbs. (0.7 kg)
Compliance (API): Yes
Compliance (Radial WHOS): Yes
Warranty: 3 years, transferable

Workhorse Tank Driver 500 Series Reverb I/O Module

Main Features