DCi 8|300DA DriveCore Install DA Amplifier 8x300W @ 4Ω Dante 2U

« return to previous page
Crown DCi 8|300DA DriveCore Install DA Amplifier 8x300W @ 4Ω Dante 2U - Main Image
Crown DCi 8|300DA DriveCore Install DA Amplifier 8x300W @ 4Ω Dante 2U - Image 1
Crown DCi 8|300DA DriveCore Install DA Amplifier 8x300W @ 4Ω Dante 2U - Image 2
Price:
RRP: £8,634.00 inc VAT
Code:
CRODCI8300DA
Manufacturer Code:
CRO0334
Brand:
Crown

Quantity required:

Main Features

  • Continuous Load Monitoring
  • Comprehensive Error Reporting
  • Pilot Tone Monitoring
  • Input/Output (GPIO) Ports
  • LevelMAXTM Limiters for Inputs and Outputs with Thermal Limiting
  • EN 54-16 Compliant
Share:

DCi 8|300DA DriveCore 8x300W Power Amplifier

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardised on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications. 

Product Features

Network Monitoring and Control Features

  • Continuous Load Monitoring
  • Comprehensive Error Reporting
  • Pilot Tone Monitoring
  • Programmable General Purpose
  • Input/Output (GPIO) Ports

Digital Signal Processing (DSP) Features

  • LevelMAXTM Limiters for Inputs and Outputs with Thermal Limiting
  • Input Compressor
  • Input and Output Delay
  • Input and Output EQ
  • Signal Generator
  • Crossover

EN 54-16 Compliant for Life Safety Applications

  • Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Product Specifications

General

  • Frequency Response (8Ω, 20Hz - 20kHz):  ±0.25dB
  • Dante Input Signal to Noise Ratio (ref. rated power, 8ohm, 20Hz-20kHz):  >108dB
  • Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%
  • Voltage Gain (at Maximum Level Setting):  34dB
  • Damping Factor (20Hz to100Hz):  >1000
  • Input Impedance (nominal balanced, unbalanced): 10kΩ, 5kΩ 
  • Maximum Input Level before Compression (Low Gain Mode):  +20dBu
  • Load Impedance Stereo/Dual Mode:  2Ω - 16Ω; 70Vrms and 100Vrms
  • Load Impedance Bridge Mono:  4Ω - 16Ω; 140Vrms and 200Vrms
  • Cooling:  Continuously variable speed forced air, front to back airflow
  • Maximum Fan Noise (re dBA SPL @ 1M):  47
  • Required AC Mains (±10%):  100Vrms - 240Vrms ~50/60Hz
  • Power Connector:  15A IEC

Physical Specifications

  • Width: 19 in. (48.3 cm)
  • Height:  3.5 in. (8.9 cm)
  • Depth:  14.25 in. (35.63 cm) 
  • Weight:  23.5 lbs (10.66 kg)

Product Video