DCi 4|1250DA DriveCore Install DA Amplifier 4x1200W @ 4Ω Dante 2U

Product Features

• Exclusive multi-patented DriveCore™ Technology – The patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliability.
• Dante™ Digital Audio Transport
• Configuration in HiQnet® Audio Architect™
• Programmable General Purpose Input/Output Control Port
• Digital Signal Processing (Input/Output EQ Filters, Crossover, Input/Output Delay, LevelMAXTM Limiters)
• Priority Input Router
• Universal power supply with PFC for reduced current draw and industry-leading efficiency
• Monitoring and Control over TCP/IP
• Real time Continuous Loading Monitoring
• Power Saving Modes – Power consumption in sleep mode is less than 1W.
• Adjustable Auto Standby
• Remote Power Off – Sleep mode activated via AUX port
• 70Vrms/100Vrms Direct Drive – Each channel individually selectable for low-Z or high-Z operation
• Advanced Protection Circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overload
• Three Year, No-Fault Transferable Warranty – Your investment is fully protected
• Complies with GreenEdge™ by HARMAN – Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation

EN 54-16 Compliant for Life Safety Applications

• Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Product Specifications

General

• Frequency Response (8Ω, 20Hz - 20kHz):  ±0.25dB
• Dante Input Signal to Noise Ratio (ref. rated power, 8ohm, 20Hz-20kHz):  >108dB
• Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%
• Voltage Gain (at Maximum Level Setting):  34dB
• Damping Factor (20Hz to100Hz):  >1500
• Input Impedance (nominal balanced, unbalanced): 10kΩ, 5kΩ 
• Maximum Input Level before Compression (Low Gain Mode):  +20dBu
• Load Impedance Stereo/Dual Mode:  2Ω - 16Ω; 70Vrms and 100Vrms
• Load Impedance Bridge Mono:  4Ω - 16Ω; 140Vrms and 200Vrms
• Cooling:  Continuously variable speed forced air, front to back airflow
• Maximum Fan Noise (re dBA SPL @ 1M):  47
• Required AC Mains (±10%):  100Vrms - 240Vrms ~50/60Hz
• Power Connector:  20A IEC

Physical Specifications

• Width: 19 in. (48.3 cm)
• Height:  3.5 in. (8.9 cm)
• Depth:  17 in. (42.5 cm) 
• Weight:  30 lbs (13.60 kg)