TM1-PLUS Omni-Directional Test / Measurement Mic with Kit

« return to previous page
Audix TM1-PLUS Omni-Directional Test / Measurement Mic with Kit - Main Image
Audix TM1-PLUS Omni-Directional Test / Measurement Mic with Kit - Image 1
Audix TM1-PLUS Omni-Directional Test / Measurement Mic with Kit - Image 2
Audix TM1-PLUS Omni-Directional Test / Measurement Mic with Kit - Image 3
Audix TM1-PLUS Omni-Directional Test / Measurement Mic with Kit - Image 4
Price:
RRP: £349.00 inc VAT
Code:
ADXTM1P
Manufacturer Code:
AX-TM1/PLUS
Brand:
Audix

Quantity required:

Main Features

  • 6mm pre-polarised condenser capsule
  • Hi SPL response
  • Precision machined brass housings
  • Low noise electronics
  • Replaceable electronics and capsule
  • 3 year warranty
Share:

TM1-PLUS Omni-Directional Test / Measurement Mic with Kit

The TM1 is a 6 mm pre-polarised condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability.

Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real time analysers and other sound control devices. With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.

The TM1 omnidirectional test and measurement microphone is designed, machined, assembled and tested by Audix in the USA.

TM1 PLUS includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter

Product Features

  • 6mm pre-polarised condenser capsule
  • Hi SPL response
  • Precision machined brass housings
  • Low noise electronics
  • Replaceable electronics and capsule
  • 3 year warranty

Applications

  • Test and measurement
  • Room analysis software programs
  • Real time analysers
  • Ambient room miking

Product Specifications

General

  • Transducer Type:  Pre-polarised Condenser
  • Frequency Response:  20 Hz - 25 kHz +/-2 dB
  • Polar Pattern:  Omni
  • Output Impedance:  200 ohms
  • Sensitivity:  6 mV / Pa @ 1k
  • Maximum SPL: 
    • 130 dB with distortion <1%
    • 140 dB Max
  • Signal to Noise Ratio:  66 dB
  • Equivalent Noise Level:  28 dB (A weighted)
  • Dynamic Range:  112 dB
  • Connector:  male XLR
  • Power Requirements:  18-52 V phantom
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Physical

  • Materials / Finish:  4 piece precision machined brass / Nickel Finish
  • Weight 132 g / 4.7 oz
  • Length 150 mm / 5.9 in

Product Downloads