BLX14R/P98H Wireless Rackmount Instrument System BLX4R/PGA98H K3E

Product Features

BLX4R Receiver Features

• One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
• Up to 12 compatible systems per frequency band (region-dependent)
• XLR and ¼” output connectors
• Two-colour audio status indicator LED
• Green: Normal audio levels
• Red: Excessive audio levels (overload/clipping)
• Adjustable output level
• Removable antennas for quick antenna distribution
• LC Display with detailed RF and audio metering

BLX1 Bodypack Features

• For use as part of BLX and BLX-R Analogue Wireless Systems
• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries provide up to 14 hours of continuous use
• 100 m (300 ft.) operating range (line of sight)

PGA98H Microphone Features

• Tailored microphone cartridge design for clear reproduction of wind instrument sound sources.
• Flexible gooseneck design makes accurate positioning quick and easy
• Integrated horn clamp for quick and easy mounting
• In-line preamplifier provides a direct XLR connection (11-52 VDC phantom power required)
• Cardioid polar pattern picks up audio from the source while rejecting unwanted noise
• Updated industrial design with black metallic finish and grille for unobtrusive visual presence
• Available with and without XLR Cable for flexibility in gear choice
• With TA4F connector for use with wireless bodypack systems
• Zipper pouch included for additional protection during storage or transport

Product Specifications

System Specifications

• Working Range:  91 m (300 ft) Line of Sight Note: Actual range depends on RF signal absorption, reflection and interference.
• Audio Frequency Response:  50 to 15,000 Hz Note: Dependent on microphone type
• Total Harmonic Distortion:  Ref. ±33 kHz deviation with 1 kHz tone 0.5%, typical
• Dynamic Range:  100 dB, A-weighted, typical
• Operating Temperature:  -18°C (0°F) to 57°C (135°F)
• Polarity:  Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.

BLX4R Specifications

• Output Impedance
  • XLR connector:  200 Ω
  • 6.35 mm (1/4") connector:  50 Ω
• Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
  • XLR connector:  –20.5 dBV (into 100 kΩ load)
  • 6.35 mm (1/4") connector:  –13 dBV (into 100 kΩ load)
• RF Sensitivity:  -105 dBm for 12 dB SINAD, typical
• Image Rejection:  >50  dB, typical
• Dimensions:  1.65 in. X 7.80 in.X 6.42 in. (42 mm X 198 mm X 163 mm) H x W x D
• Weight without antennas:  2.2 lbs (998 g)
• Housing:  Molded ABS, steel
• Power Requirements:  12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

BLX1 Bodypack Specifications

• Audio Input Level
  • max:  -16 dBV maximum
  • min (0 dB):  +10 dBV maximum
• Gain Adjustment Range:  26 dB
• Input Impedance:  1 MΩ
• RF Transmitter Output:  10 mW, typical (varies by region)
• Dimensions:  4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D
• Weight:  2.6  oz. (75 g), without batteries
• Housing:  Molded ABS
• Power Requirements:  2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life:  up to 14  hours (alkaline)

PGA98H Microphone Specifications

• Type:  Electret condenser
• Frequency Response:  60 to 20,000 Hz
• Polar Pattern:  Cardioid
• Output Impedance:  850 Ω
• Sensitivity at 1 kHz, open circuit voltage:  -52 dBV/Pa (2.51 mV) 1 Pa=94 dB SPL
• Maximum SPL 1 kHz at 1% THD, 1 kΩ:  130 dB SPL
• Self-Noise A-weighted, typical:  27 dB SPL-A
• Polarity:  Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight:  210 g (8 oz.)
• Connector:  4-pin, female TA4F miniature XLR connector
• Housing:  Cast Zinc
• Power Requirements:  11–52 VDC phantom power (2 mA)

What's in the Box?

• 1 x BLX1 Bodypack
• 1 x BLXR4 Receiver
• 1 x PGA98H Clip-On Mic
• 1 x 53A8611 RACK MOUNT BRACKET
• 1 x 53A8612 LONG RACK MOUNT BRACKET
• 1 x 53B8443 LINK BRACKET
• 1 x 90AZ8100 HARDWARE KIT
• 1 x 90F4046 Swivel Adapter
• 1 x 31B1856 Thread Adapter
• 2 x 95A8699 ANTENNA/BNC,1/4 WAVE
• 2 x 95A8994 ADAPTER,BULKHEAD,BNC
• 1 x 95B2313 BAG VINYL, ZIPPERED
• 2 x 95K2035 CABLE,BNC,22 in.
• 1 x Power supply